VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Krieghoff Brass Mid Sight Bead1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Spare Ring-to-Base Screws1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Brass Front Sight Bead1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Krieghoff Spares Kit1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Quick Release Mount for Swarovski Rail1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Navy Gun Slip1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Trigger Screw1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight2 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA) Extended1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x EX Demo - Gerber Metolius Pocket Folder1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x Gerber Octane Multi-Tool Red1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]
Manufacturers
Useful Information