Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x MSA Sordin - Hygiene Kit - Foam Seals1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x ERATAC Bubble Level [T0940-0002]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Bauer Outdoor 8x21 Binoculars1 x Briley 20b Speed Wrench - For Krieghoff1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Krieghoff Brass Mid Sight Bead1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Krieghoff Brass Front Sight Bead1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Krieghoff Pro Choke Box
Manufacturers
Useful Information