Kick-Eez Modified Trap (403)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ403
The revolutionary design of this pad is slightly concave with a blast finish on the face. It gives you 100% contact with your shoulder, eliminating pressure points. Also, the design allows you to shoulder the pad in the same position every time. This pad is a good choice for all shooting applications.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.
Colour: Black

Measurements:
Width - 52mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad (see images for thicknesses):
403-6 : 7mm-15mm-22mm (0.28"-0.6"-0.87") Thick / Weight: 128 g
403-8 : 13mm-22mm-28mm (0.51"-0.87"-1.1") Thick / Weight: 177 g

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 301 - All Purpose
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

Kick-Eez Trap (401)
Kick-Eez Trap (401)
£54.00
20% VAT incl.
1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]2 x Recknagel Picatinny Bases - Remington 700 (6-48)2 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]2 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]2 x ERATAC Picatinny Extended Riser Mount (Nut)2 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel 30mm Ring Components - 5mm BH1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x WalkStool Set of Spare Red Spring1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]2 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]2 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]2 x Recknagel Picatinny Bases - Schultz & Larsen2 x Recknagel Picatinny Bases - Remington 700 (8-40)1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x ERATAC ACI Elevation Turret [T0941-0000]2 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Grip Cap Compartment2 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Stock Shield - 2 Point Shield Contoured2 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]2 x WalkStool Spare Leg Joints1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Krieghoff Brass Front Sight Bead1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH2 x Recknagel Grip Cap Skeleton Domed [24060-2100]1 x AimZonic Compact Camo Sound Moderator3 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel 36mm Ring Components - 5mm BH1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Extended Rail Remington 700 Short [57250-0012]2 x Recknagel Grip Cap Domed with Edge [24000-0200]2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Picatinny Rail Benelli ARGO, Alu [..0076]1 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel SOB01 Silencer (Standard Thread)3 x Recknagel Weaver Bases - Chapuis Express [57080-3029]2 x Recknagel Weaver Bases - Browning Mauser [..-3057]2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Walkstool Steady1 x Recknagel Picatinny Rail 200mm Blank No Slots, Steel [..0000]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Recknagel SOB02 Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel Weaver Bases - Winc. 70 WSM [..-301I]1 x Jones Thru-the-Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Recknagel Picatinny Rail Remington 700 L, Steel [..0112]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Recknagel Weaver Bases - Santa Barbara Rep. [..-3044]1 x Recknagel Weaver Bases - Steyr-Mannlicher [57080-3088]1 x Recknagel Weaver Bases - Roessler Titan 3 / 6 [..-3092]1 x Bear Grylls Compact Multi-Tool by Gerber1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Recknagel Picatinny Rail Howa 1500 Short, Alu (20 MOA)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Steel [..2010]1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x Gerber Paraframe II Fine Edge Knife1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Browning X Bolt Super S, 20 MOA, Alu1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Picatinny Rail Sauer 303, Alu [..041R]1 x WalkStool Comfort 65 (65cm/26in)1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Grip Cap Flat with Small Edge [24020-0400]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Weatherby Mark V/300 [.3023]1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Bauer Outdoor 10x25 Binoculars1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Krieghoff "K" Collectors Badge1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)
Manufacturers
Useful Information