VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Front Ramp Hood ATV [13093-1810]1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Recknagel Super Express 1 Leaf Sight [15400-3025]1 x Recknagel Front Ramp [12000-0000]1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts2 x Recknagel Hood for Front Ramp [13020-1580]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Remington 700 Long Euro Rail for QR Mounts2 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]2 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]2 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Weaver Bases - Heym SR 30 [57080-3090]3 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Weaver Bases - Heym SR 21 [57080-3022]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Recknagel Weaver Bases - Mauser M96/M97 [..-3097]1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Recknagel Weaver Bases - Howa 1500 [57080-3059]1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Recknagel Weaver Bases - Merkel SR1 Basic [..-302D]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Mauser M96 [..-3096]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods Brass1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)
Manufacturers
Useful Information