Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Badge - Cob Bronze1 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Black Barrel Case (83cm Internal)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Anschütz Biathlon Harness1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Gerber New Myth Series Pocket Folder1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Black Leather Shell/Cartridge Pouch1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Krieghoff "K" Collectors Badge1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x AimZonic Plus Camo Sound Moderator1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber Basic Fixed Blade Serrated1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount
Manufacturers
Useful Information