VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

3 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Brass Front Sight Bead1 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Quick Release Picatinny Rail1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Navy Gun Slip1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Krieghoff Trigger Screw1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Jones Gun Nut Kit1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Schmierfix Grease by Liqui Moly1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Bauer HD Series 8x25 Binoculars1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)
Manufacturers
Useful Information