Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Jones Thru-the-Pad Adjuster2 x ERATAC Picatinny Extended Riser Mount (Nut)2 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x WalkStool Comfort 65 (65cm/26in)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Masterpiece Banded Front Ramp [12520-0180]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Recknagel Picatinny Rail Browning A Bolt 3 Short, Alu [..002T]1 x Schmierfix Grease by Liqui Moly1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Spare Ring-to-Base Screws1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Bear Grylls Compact Multi-Tool by Gerber1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Recknagel SOB01 Silencer (Standard Thread)2 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)
Manufacturers
Useful Information