Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff Achievement Badge 100/3002 x Krieghoff 2018 DTL Badge (Collectors Badge)2 x Black Barrel Case (83cm Internal)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Krieghoff 2009 Badge (Collectors Badge)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Bauer Outdoor 8x21 Binoculars1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff "K" Collectors Badge1 x Badge - Cob Bronze1 x VFG Pull Through Pocket Set for .22 Upwards1 x Gerber Myth Series Fixed Saw1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Ex-Display Gerber GDC Zip Hex1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber GDC Zip Blade1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Classic "Big Five" Badge1 x Bauer Outdoor 10x25 Binoculars1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Blank 12mm Eurorail - 150mm1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)
Manufacturers
Useful Information