VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser2 x Recknagel Weaver Bases - Mauser M96 [..-3096]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Picatinny Rail Mauser M18, Steel, 20 MOA [..202X]2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Picatinny Rail Mauser 98, Alu [..0010]1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel Picatinny Rail Mauser 98, Steel [..0010]1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA) Extended1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x Contessa Picatinny Rail - Browning X Bolt Short (0 MOA) Extended1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Picatinny Rail Howa 1500 Short, Alu (20 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x Recknagel Weaver Bases - Howa 1500 [57080-3059]1 x Contessa Picatinny Rail - Howa 1500 Short (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Browning X Bolt Short (0 MOA)1 x Contessa Picatinny Rail - Browning BAR (0 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher S, 0 MOA, Alu [..0388]1 x Contessa Picatinny Rail - Savage Long (10 MOA)1 x Contessa Picatinny Rail - Savage Axis/Edge, Short (20 MOA)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Browning A Bolt 3 Short, Alu [..002T]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings
Manufacturers
Useful Information