Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x Krieghoff Extended Pillars for Adjustable Comb1 x Teague Precision Choke Key1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)4 x Jones Thru-the-Pad Adjuster1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x K-80 Standard Trigger - Titanium1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff 12b Choke Wrench1 x Krieghoff Choke Multi Wrench2 x Briley 20b Speed Wrench - For Krieghoff1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Recknagel Replacement Polyform Lever [00088-5700]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable4 x Schmierfix Grease by Liqui Moly1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff K-80 Badge "K-80 Sport" Logo3 x Silva Dine Duo Kit - Purple/White1 x Krieghoff "K" Collectors Badge1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)3 x Silva ex10 Distance Pedometer - White1 x CR2032 Camelion Lithium Battery1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Badge - Cob Bronze2 x Schultz & Larsen Torx Key for Scope Mounts1 x Silva Dine Duo Kit - Turquoise/White1 x Contessa Spare Blaser Mounting Clamp Parts2 x Silva Map Measurer (Mechanical)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Contessa Picatinny Rail - Merkel Helix (0 MOA)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Picatinny Rail - Winchester 70 Long (10 MOA)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Gerber Gator Combo Replacement Saw2 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Black Barrel Case (83cm Internal)1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]2 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x VFG Magnetic Felt Clamps for Vices - 150mm3 x Jones Original Pad Adjuster1 x Ebony & Brass 20 Bore Snap Caps3 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Contessa Quick Release Picatinny Rail1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver Bases - Steyr-Mannlicher M [..-3051]1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Gerber Myth Series Fixed Saw1 x Bauer ED 10x42 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x Bauer ED 8x42 Binoculars1 x Bauer ED 8x32 Binoculars1 x Bauer HD 8.5x50 Binoculars1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel Picatinny Rail Winchester XPR Short, Alu [002V]1 x Gerber GDC Zip Blade2 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Recknagel Weaver Bases - Mauser M12 [..-302L]3 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Anschütz Biathlon Harness1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Gerber Metolius Pocket Folder1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]2 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Hi Viz - How to Become a Better Shooter1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Jones Gun Nut Kit1 x Gerber Basic Fixed Blade Serrated1 x Starkie Blue (A.K.A Smurf Poo)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)
Manufacturers
Useful Information