Contessa QD Rear Extended Picatinny Rail Mount for Blaser

£375.13
20% VAT incl.


  • Model:SBB03/R
Contessa Rear Extended Picatinny Rail for Blaser
Quick Release (QD) Rail Mount including Rear Picatinny Rail for Blaser


Rail Length: 190mm
Height without Rail (BH): 12.5mm
Height with Rail (BH): 19.5mm
Extends Backwards - 98mm Back past the rear rifle clamp notch
Weight: 282g
Fits Models: R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 1 x Forward Extended Picatinny Rail (EBB02-REAR)
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

This quick release mount is an extended Picatinny Rail, suitable for night vision, allowing greater flexibility in eye relief position. This mount is supplied with a quick release base with ONLY THE REAR EXTENDED RAIL, that extends backwards towards the eye. Simple single release lever and high quality with guaranteed return to zero.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Forward Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

1 x Contessa Picatinny Rail - Tikka T3 / T3X (30 MOA)2 x Contessa 30mm Rings for Simple Black - 7.5mm (High)2 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)2 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Contessa Browning European Euro Rail for Quick Release Mount2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Browning BAR Euro Rail for Quick Release Mount2 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Krieghoff Brass Front Sight Bead2 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)2 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Anschütz Biathlon Harness1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Shiny Chromed Steel Picatinny Rings - 30mm (8mm BH)2 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Quick Release Picatinny Rail1 x Gerber Descent - Folding Knife1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]4 x Schmierfix Grease by Liqui Moly1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Pro Choke Box1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Gerber GDC Zip Blade1 x Krieghoff Shell Bag1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Krieghoff Choke Multi Wrench1 x Krieghoff "K" Denim Cap - Grey1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]2 x Krieghoff Classic "Big Five" Badge2 x Parker Hale Thread to 8-32 Thread Converter2 x Recknagel Grip Cap Full Domed [24000-0100]1 x ERATAC Picatinny Extended Riser Mount (Nut)2 x Ex-Display Gerber GDC Zip Hex1 x Contessa Quick Release Mount for Burris/Nikon2 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)2 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH2 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Adaptor for VFG Rods Brass1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]2 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x EX Demo - Gerber Metolius Pocket Folder1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended2 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]2 x Bauer HD Series 8x25 Binoculars1 x Bear Grylls Basic Survival Kit by Gerber1 x Bear Grylls Compact Multi-Tool by Gerber1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Gerber Metolius Pocket Folder1 x Krieghoff 2015 Badge (Collectors Badge)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]
Manufacturers
Useful Information