Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]4 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)2 x WalkStool Set of Spare Red Spring1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Spare Blaser Mounting Clamp Parts2 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Picatinny Rail Steyr-Mannlicher S, 0 MOA, Alu [..0388]1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Spares Kit2 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x AimZonic Compact Camo Sound Moderator1 x ERATAC Picatinny Riser Mount Block (Nut)1 x Krieghoff Sight Bead Blanking Screw1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Bauer ED 8x50 Binoculars1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff "K" Mesh Cap - Black1 x Gerber Metolius Pocket Folder1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x ERATAC Picatinny Riser Mount Block (QD)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Krieghoff Pro Choke Box1 x K-80 Forward Position Trigger - Gold Titanium1 x ERATAC ACI Bubble Level [T0940-0000]1 x WalkStool Spare Leg Joints1 x WalkStool Comfort 65 (65cm/26in)1 x Bauer Outdoor 8x21 Binoculars1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Picatinny Rail - Browning X Bolt Long (20 MOA)1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)2 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Browning BAR Euro Rail for Quick Release Mount2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Krieghoff Achievement Badge 200 Straight (Black)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x ERATAC KeyMod Adaptor for HK Hook [T4500-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x VFG Adaptor for VFG Rods (Spare)1 x ERATAC KeyMod Picatinny Rail. 9 Slots [T4909-0010]
Manufacturers
Useful Information