Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)

£148.61
20% VAT incl.


  • Model:PH14/C/20
Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 20 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 154mm
Height (BH) - 12.5mm Approx.
Weight: - 175g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x VFG Pull Through Pocket Set for .22 Upwards4 x Schmierfix Grease by Liqui Moly1 x Krieghoff Woven Fabric Patch1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff Navy Gun Slip1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Krieghoff Pro Choke Box2 x Krieghoff Spares Kit2 x Krieghoff Trigger Screw1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Ebony & Brass 20 Bore Snap Caps1 x K-80 Standard Trigger - Titanium3 x Krieghoff Front Sight Bead (Standard)3 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]2 x Krieghoff Comb Wrench (T-Handle)5 x Krieghoff Extended Pillars for Adjustable Comb1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x K-80 Forward Position Trigger - Steel2 x K-80 Forward Position Trigger - Titanium3 x Custom Rifles of Great Britain by Bruce Potts2 x Krieghoff Sight Bead Blanking Screw1 x Jones Thru-the-Pad Adjuster3 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Magnetic Felt Clamps for Vices - 150mm2 x AG3 / 392A Alkaline Batteries (10 Pack)2 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x WalkStool Set of Spare Red Spring1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Krieghoff Stock Removal Wrench4 x K-80 Stock Weight for Balance System1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)2 x Krieghoff Brass Mid Sight Bead1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Bauer Outdoor 10x25 Binoculars1 x Briley 20b Speed Wrench - For Krieghoff3 x Krieghoff Factory Hanger Pin1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Adaptor from M5 to 1/8" Aluminium1 x WalkStool Spare Leg Joints3 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Jones Original Pad Adjuster1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x WalkStool Comfort 65 (65cm/26in)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x K-80 Barrel Weight Balance System1 x K-80 Forward Position Trigger - Gold Plated1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Recknagel Grip Cap Compartment1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff K-Diamond Beanie - Navy1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Krieghoff HIVIZ Pro Sights1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Jones Gun Nut Kit1 x Recknagel Steel Stock Trap Door1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff C-Clips (E-Clips)1 x K-80 Standard Trigger - Steel1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x K-80 Standard Trigger - Gold Plated1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]2 x AimZonic Plus Camo Sound Moderator1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Spare Screw for Sako 75/85 Rails1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Badge - Cob Bronze1 x Krieghoff Achievement Badge 25 Straight1 x Silva Commute Bike Light - Green1 x Starkie Blue (A.K.A Smurf Poo)1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Krieghoff .410g Choke Wrench1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Teague Precision Choke Key1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff "K" Logo Cap Black & White1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Gerber Basic Fixed Blade Serrated
£51,701.89
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA) Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable