Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Krieghoff Brass Front Sight Bead4 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Jones Original Pad Adjuster1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount2 x Contessa Remington 700 Long Euro Rail for QR Mounts3 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Quick Release Mount for Zeiss Rail2 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Quick Release Picatinny Rail1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)2 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff Navy Gun Slip1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount3 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)2 x Krieghoff Brass Mid Sight Bead1 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Krieghoff Spares Kit1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x WalkStool Spare Leg Joints1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x AimZonic Compact Camo Sound Moderator1 x WalkStool Set of Spare Red Spring1 x AimZonic Plus Camo Sound Moderator2 x Krieghoff Front Sight Bead (Small)2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Black Leather Shell/Cartridge Pouch1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm2 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Anschütz Biathlon Harness1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)2 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa Picatinny Rail - Browning X Bolt Short (20 MOA)1 x Krieghoff 12b Choke Wrench1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Picatinny Rail - Remington 700 Short (20 MOA)1 x Contessa Picatinny Rail - Remington 783 Short (0 MOA)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]2 x Krieghoff "K" Denim Cap - Grey1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x ERATAC ACI Elevation Turret [T0941-0000]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA) Adjustable1 x Recknagel Picatinny Rail Remington 700 L, Steel [..0112]1 x Recknagel Picatinny Rail Savage Long 0 MOA, Alu [..0193]1 x Recknagel Picatinny Rail Remington 700 L 20MOA, Steel [..2112]1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Winchester 70 Short (10 MOA)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Picatinny Rail Winchester Mod.70 Long, Alu [0124]1 x K-80 Forward Position Trigger - Black Titanium1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Picatinny Rail - Winchester 70 Short (20 MOA)1 x Recknagel Picatinny Rail Winchester Mod.70 WSM, Alu [0169]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Howa 1500 Long (0 MOA)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]1 x Recknagel Weaver Bases - Mauser M96 [..-3096]1 x Recknagel Weaver Bases - Mauser K98 [57080-3010]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa Picatinny Rail - CZ 550 Magnum (20 MOA)1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Mauser 98, Alu [..0010]1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Gerber Metolius Pocket Folder1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Recknagel SOB02 Silencer (Standard Thread)
Manufacturers
Useful Information