VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

3 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Black Barrel Case (83cm Internal)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x WalkStool Set of Spare Red Spring1 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Walkstool Steady1 x WalkStool Comfort 65 (65cm/26in)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Jones Original Pad Adjuster1 x Black Leather Shell/Cartridge Pouch1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Gerber Metolius Pocket Folder2 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Gerber GDC Zip Blade1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa Picatinny Rail - Browning BAR (0 MOA)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Jones Gun Nut Kit1 x Gerber Descent - Folding Knife1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x WalkStool Spare Leg Joints1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]
Manufacturers
Useful Information