K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

3 x Krieghoff 28b Choke Wrench3 x Krieghoff Pro Choke Box2 x Krieghoff 12b Choke Wrench2 x Teague Precision Choke Key3 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes4 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes3 x Krieghoff Trigger & Selector Locking Wrench2 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff .410g Choke Wrench2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Krieghoff K80 Speed Wrench for Factory Chokes3 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes4 x K-80 Stock Weight for Balance System2 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Stock Removal Wrench1 x Krieghoff Ejector Ball and Spring2 x Krieghoff Sight Bead Blanking Screw2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)3 x Krieghoff Spares Kit2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set4 x Krieghoff Factory Hanger Pin2 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x Krieghoff Comb Wrench (T-Handle)4 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Front Sight Bead (Standard)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master3 x K-80 Barrel Weight Balance System1 x Krieghoff Brass Mid Sight Bead2 x Briley 20b Speed Wrench - For Krieghoff3 x Krieghoff Trigger Screw1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x K-80 Forward Position Trigger - Gold Plated2 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Gold Plated2 x K-80 Standard Trigger - Steel2 x K-80 Standard Trigger - Black Titanium2 x K-80 Forward Position Trigger - Titanium2 x K-80 Standard Trigger - Gold Titanium2 x K-80 Standard Trigger - Titanium2 x K-80 Forward Position Trigger - Steel2 x K-80 Forward Position Trigger - Gold Titanium1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Starkie Blue (A.K.A Smurf Poo)1 x Ebony & Brass 20 Bore Snap Caps1 x WalkStool Comfort 65 (65cm/26in)2 x Black Barrel Case (83cm Internal)1 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints1 x Black Leather Shell/Cartridge Pouch1 x Walkstool Steady1 x Custom Rifles of Great Britain by Bruce Potts2 x Schmierfix Grease by Liqui Moly1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]3 x Krieghoff Brass Front Sight Bead2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Jones Gun Nut Kit3 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Shell Bag2 x Jones Thru-the-Pad Adjuster1 x Jones Original Pad Adjuster1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x MSA Sordin - Hygiene Kit - Foam Seals2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff "K" Denim Cap - Grey1 x Bauer Outdoor 8x21 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x AimZonic Compact Camo Sound Moderator1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel SOB3D Silencer (ERA LOC)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff "K" Collectors Badge1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Krieghoff Woven Fabric Patch1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]
Manufacturers
Useful Information