Krieghoff Black Titanium Hanger, Choke Tube Barrels

£230.00
20% VAT incl.

Available Options

  • Model:BTH


The Black Titanium Hanger

Please Note: The Black Titanium Hanger is available to purchase with an estimated 7-10 day delivery time

Black Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the Black Titanium Choke Tubes the difference in handling is noticeable.

Available in sizes #1, #2, #3, #4, #5 #6 and #7 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm
#2 = 1,0 mm
#3 = 1,5 mm
#4 = 2,0 mm
#5 = 2,5 mm
#6 = 3,0 mm
#7 = 3,5 mm
#8 = 4,0 mm



We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
Pin Punches (1.4mm/0.9mm)
Pin Punches (1.4mm/0.9mm)
£15.00
20% VAT incl.
1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Briley 20b Speed Wrench - For Krieghoff1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Krieghoff Sight Bead Blanking Screw1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x K-80 Forward Position Trigger - Titanium2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Mount for Swarovski Rail1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Front Sight Bead (Small)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)
Manufacturers
Useful Information