Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)

£185.00
20% VAT incl.


  • Model:SL6027
Schultz & Larsen Scope Rings
30mm - X-High (20mm Base Height)


Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 114g
Ring Diameter - 30mm
Base Height (BH) - 20mm
Code Ref: SL6027

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]4 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Starkie Blue (A.K.A Smurf Poo)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)2 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Krieghoff Factory Hanger Pin1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa Quick Release Mount for Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Walkstool Steady1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body
Manufacturers
Useful Information