Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]

£130.10
20% VAT incl.


  • Model:57050-1011
Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]
Recknagel Picatinny Aluminium Rail for 11mm Dovetail
Black anodised

Height (BH) - 10.5mm
Length - 145mm
Usable length of Rail - 110mm
Distance between Clamps - 70mm
Weight - 68g
Code - 57050-1011

Contents Supplied
- 1x Black Anodised Rail, 1 x Wrench

Made of high strength aluminum and black anodized finish. The rail attaches to a 11mm dovetail with two side clamps, tightened with the included Torx wrench. The rail is fitted with a single recoil stud on the underside, which can be fitted to any one of 4 pre drilled locations, or removed completely if the rifle has no provision for a recoil stud.

This scope mount part converts the 11mm dovetail to the stronger and widely used picatinny rail system.
There are a number of rifles this rail will fit, including: - Sako Quad with 11mm Dovetail
- Sako Finnfire & Finnfire II
- Sako Finnlight
- Weirauch HW Air Rifles with 11mm Dovetail (Check Dimensions of the clamps against your rifle)
- BRNO Models with 11mm Dovetail (Check Dimensions of the clamps against your rifle)

This rail fits all 11mm and 11.5mm dovetails.



You might also like...

Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud
Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud
£28.97
20% VAT incl.
View
Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud
Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud
£33.13
20% VAT incl.
View
Gerber Myth Series Fixed Saw
Gerber Myth Series Fixed Saw
£15.00
20% VAT incl.
View
Schmierfix Grease by Liqui Moly
Schmierfix Grease by Liqui Moly
£6.80
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Black Leather Shell/Cartridge Pouch1 x Black Barrel Case (83cm Internal)1 x Gerber Metolius Pocket Folder2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Silva Dine Duo Kit - Purple/White1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount
£10,856.01
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081] Recknagel Picatinny Rail CZ 550 Standard, Alu [..0062] Recknagel Picatinny Rail Sako Short, Alu [..0014]