Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/20
Contessa Picatinny Rail for Sako 75 / 85 Long
With 20 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
Material: - Steel
Code Ref: PH14N/20

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video



Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]4 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]3 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]3 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]4 x VFG Barrel Cleaning Felts for .22 (Box of 500)3 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x Silva Dine Duo Kit - Turquoise/White1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)2 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)3 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Gerber Metolius Pocket Folder1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Recknagel Weaver Bases - Browning BBR [57080-3004]2 x Schmierfix Grease by Liqui Moly1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser3 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)3 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)2 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]2 x CR2032 Camelion Lithium Battery1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Picatinny Rail - Winchester 70 Long (10 MOA)1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]2 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0010]1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Picatinny Rail - CZ 550 Magnum (20 MOA)1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Picatinny Rail - Roessler Titan 3 / 6 (20 MOA)1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Short (30 MOA)1 x Bauer ED 8x42 Binoculars3 x Recknagel Picatinny Rail Mauser 98, Steel [..0010]1 x Recknagel Picatinny Rail Sauer 101 (Pre #A020555), Alu [..002K]2 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Long (10 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (30 MOA)2 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Recknagel Picatinny Rail Krico 700/900/902*, Alu [..0006]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)2 x Contessa Picatinny Rail - Howa 1500 Short (10 MOA)2 x Contessa Picatinny Rail - Howa 1500 Long (20 MOA)1 x Contessa Picatinny Rail - Mauser M12 (0 MOA) Extended1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x Contessa Picatinny Rail - Howa 1500 Short (20 MOA)1 x Contessa Picatinny Rail - Howa 1500 Long (0 MOA)1 x Recknagel Picatinny Rail Howa 1500 Short, Alu (20 MOA)1 x Recknagel Picatinny Rail Howa 1500 Short, Alu [..0059]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)2 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x Recknagel Weaver Bases - Mauser K98 [57080-3010]1 x Contessa Picatinny Rail - Howa 1500 Long (10 MOA)2 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Steel [..2010]2 x Recknagel Picatinny Rail Mauser 98, Alu [..0010]2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)2 x ERATAC Bubble Level [T0940-0002]2 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Picatinny Rail Savage Long 20 MOA, Alu [..2193]1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Bauer ED 8x32 Binoculars1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]2 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x EX Demo - Gerber Metolius Pocket Folder1 x Winchester 3" Folding Knife3 x Parker Hale Thread to 8-32 Thread Converter1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Recknagel Picatinny Rail Winchester XPR Short, Alu [002V]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Schultz & Larsen Take Down Rifle Case1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Bauer Outdoor 10x25 Binoculars1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA) Extended1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Gerber GDC Zip Blade1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Ex-Display Gerber GDC Zip Hex2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Hood for Front Ramp [13020-1580]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Adaptor for VFG Rods Brass1 x Jones Gun Nut Kit2 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Schultz & Larsen Red Recoil Pad1 x Contessa Quick Release Mount for Swarovski Rail1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x VFG Complete Set for .1771 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Gerber Basic Fixed Blade Serrated1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Krieghoff "K" Collectors Badge1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA)1 x Gerber New Myth Series Pocket Folder1 x Gerber Paraframe II Fine Edge Knife
Manufacturers
Useful Information