Schultz & Larsen T-Handle Wrench (4mm Hex)

£7.50
20% VAT incl.


  • Model:SL-TWRENCH
Schultz & Larsen T-Handle Wrench (4mm Hex)

For use with Schultz & Larsen rifles, including the Classic DL, Victory and Ambassador. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 140mm
Weight: 31 g
4mm Hex/Allen Wrench
3 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)4 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights3 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff HIVIZ Pro Sights4 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Anschütz Biathlon Harness1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Adaptor for VFG Rods Brass1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Safety for Mauser K98 [30100-5000]1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)
Manufacturers
Useful Information