VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)

£13.73
20% VAT incl.


  • Model:332007
VFG Barrel Intensive Cleaning Felts for 7mm
Code: (66831) 332007


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .270 calibres.

The 7mm felts are recommended for the following calibres: .280 Rem., .284 Win., .270 Win., 7x57, 7x64, 7mm Mauser, All 7mm Calibres
See which Felts suit your Calibre >>>

Supplied as small box containing:
50 intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) N/A
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff HIVIZ Pro Sights1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Brass Mid Sight Bead1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Schmierfix Grease by Liqui Moly1 x WalkStool Spare Leg Joints1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Ex-Demo K-80 Steel 12b Hanger #51 x EX Demo - Gerber Metolius Pocket Folder1 x Gerber Gator Combo Replacement Saw1 x Black Leather Shell/Cartridge Pouch2 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Custom Rifles of Great Britain by Bruce Potts1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Picatinny Rail - Howa 1500 Long (0 MOA)1 x Contessa Picatinny Rail - Merkel Helix (20 MOA)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x VFG Adaptor for VFG Rods (Spare)1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]
Manufacturers
Useful Information