VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)2 x Contessa Picatinny Rail - CZ 527 (0 MOA)2 x MSA Sordin - Hygiene Kit - Foam Seals2 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)2 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa One Piece QD Picatinny Mount for Burris Scopes2 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x AimZonic Plus Camo Sound Moderator1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Krieghoff Spares Kit1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long2 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Walkstool Steady1 x Krieghoff Navy Gun Slip2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable3 x WalkStool Spare Leg Joints1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Spare Blaser Mounting Clamp Parts2 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff Ejector Ball and Spring1 x Krieghoff Woven Fabric Patch1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x ERATAC Picatinny Riser Mount Block (Nut)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Bear Grylls Basic Survival Kit by Gerber1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - H&K SLB 2000 (0 MOA)1 x Contessa Picatinny Rail - Mauser M12 (0 MOA) Extended1 x Contessa Picatinny Rail - Merkel Helix (0 MOA) - Extended1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x LED Lenser Intelligent Filter Set with Holster1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Krieghoff Shell Bag2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser2 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)2 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]2 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x ERATAC Picatinny Riser Mount Block (QD)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x Krieghoff Comb Wrench (T-Handle)2 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x AimZonic Compact Camo Sound Moderator1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel SOB01 Silencer (Standard Thread)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Remington 700 Long (20 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Jones Gun Nut Kit1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail
Manufacturers
Useful Information