Pin Punches (1.4mm/0.9mm)

£15.00
20% VAT incl.

Available Options

  • Model:PUNCHES


Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the centre of the hollow cross pin to provide support whilst it is replaced.

The pin punch is used to drive objects using a soft hammer, with care taken not to damage your equipment when using.

You may also require a spare Krieghoff Hanger Pin.

The Pin Punches are Available in:
- Set of 2 (both 1.4mm & 0.9mm) - £15.00
- 1.4mm Only - £7.50
- 0.9mm Only - £7.50



You might also like...

2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Parker Hale Thread to 8-32 Thread Converter2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x Walkstool Steady1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Spares Kit3 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Schmierfix Grease by Liqui Moly1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Trigger Screw1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Jones Gun Nut Kit1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x K-80 Stock Weight for Balance System1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x ERATAC M-Lok Picatinny Rail, 3 Slots [T5903-0008]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Jones Thru-the-Pad Adjuster1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Quick Clean Felts for .177 (Box of 100)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)
Manufacturers
Useful Information