Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff "K" Denim Cap - Navy1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Krieghoff "K" Collectors Badge1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x AA x 4 Camelion Plus Alkaline Batteries1 x Krieghoff Navy Gun Slip1 x Bauer ED 8x42 Binoculars1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x Ex-Demo K-80 Steel 12b Hanger #51 x VFG Adaptor for VFG Rods (Spare)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Schultz & Larsen Professional Bipod by Spartan1 x Schmierfix Grease by Liqui Moly1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)1 x Jones Original Pad Adjuster1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Zeiss Rail 70º Components - 4mm BH
Manufacturers
Useful Information