Contessa QD Mount for ATN 4K Night Vision (Picatinny)

£390.31
20% VAT incl.


  • Model:SBP10
Contessa, Quick Detachable Mount for Picatinny
Designed for the ATN 4K Night Vision Scope


Length: 160mm
Length of Picatinny on Ring Cap: 35mm
Height with Rings (BH): 18.5mm
Height without Rings (BH): 12.5mm
Weight: 275g
Code: SBP10
Extends Backwards from Rear Lug: 65mm
Distance Between Rings: 109mm

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel
- Complete with screws for mounting the Pulsar

The Contessa Quick Release Mount for ATN 4K features two 30mm Rings spaced perfectly apart to be able to mount the scope. The front ring has a Universal Interface Ring Cap with a 35mm Picatinny Rail offset to the one side, to be able to mount a UV Lamp. This ring cap can be swapped with the rear ring cap and the section of picatinny mounted to the right of left side.

The mount will fit any existing picatinny rail and uses a solid recoil lug bar on the underside of the mount, with a quick release lever to lock the rail onto the picatinny rail. Due to the quick release lever being set at the same tension when attached, the mount retains the same solid mount each time you fit it back on to the picatinny rail. Although the method of attachment is highly accurate, due to the nature of the picatinny system, it may not always be possible to achieve 100% repeatable zero depending on the mounting procedure, but the accuracy will certainly be within 1 MOA. This is common throughout the whole Contessa Quick Release series.

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here


Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Quick Release Mounts Here.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff Woven Fabric Patch2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Trigger Screw1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Magnetic Felt Clamps for Vices - 100mm2 x VFG Magnetic Felt Clamps for Vices - 125mm2 x Gerber Metolius Pocket Folder1 x Winchester 3" Folding Knife1 x Gerber Basic Fixed Blade Serrated1 x Schmierfix Grease by Liqui Moly1 x Gerber Octane Multi-Tool Red1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)3 x Gerber Myth Series Fixed Saw2 x Jones Thru-the-Pad Adjuster1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Ring-to-Base Screws1 x Gerber Gator Combo Replacement Saw1 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Jones Original Pad Adjuster1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)
Manufacturers
Useful Information