VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)

£8.74
20% VAT incl.


  • Model:331999
VFG Barrel Intensive Cleaning Felts for .22
Code: (66817) 331999


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The Intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing:
80 Intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff Woven Fabric Patch2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Trigger Screw1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Magnetic Felt Clamps for Vices - 100mm2 x VFG Magnetic Felt Clamps for Vices - 125mm3 x Gerber Metolius Pocket Folder3 x Winchester 3" Folding Knife1 x Gerber Basic Fixed Blade Serrated1 x Schmierfix Grease by Liqui Moly2 x Gerber Octane Multi-Tool Red1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)3 x Gerber Myth Series Fixed Saw2 x Jones Thru-the-Pad Adjuster1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Ring-to-Base Screws1 x Gerber Gator Combo Replacement Saw1 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Jones Original Pad Adjuster1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Contessa Spare Screw M10 for Anschutz/CZ Rails2 x Schultz & Larsen Torx Key for Scope Mounts2 x Recknagel Replacement Polyform Lever [00088-5700]2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Gerber Paraframe II Fine Edge Knife1 x Ex-Display Gerber GDC Zip Hex1 x DMT Diafold Magna-Guide Kit1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable2 x Krieghoff "K" Collectors Badge1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Picatinny Rail Krico 700/900/902*, Alu [..0006]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Mauser K98 [57080-3010]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Contessa Picatinny Rail - Howa 1500 Short (10 MOA)1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Schultz & Larsen Picatinny Rail for Ambassador (0 MOA)1 x Recknagel Weaver Bases - Mauser M96/M97 [..-3097]1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)1 x Schultz & Larsen Picatinny Rail for Ambassador (20 MOA)1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Contessa Picatinny Rail - Howa 1500 Long (20 MOA)1 x Contessa Picatinny Rail - Howa 1500 Short (20 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Recknagel Picatinny Rail Howa 1500 Short, Alu (20 MOA)1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x CR2032 Camelion Lithium Battery1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor
Manufacturers
Useful Information