Schultz & Larsen Thunderdome Moderator (Over Barrel)

£285.00
20% VAT incl.


  • Model:SL-TD-OB
Schultz & Larsen | Sound Moderator

HARDCORE SERIES - THUNDERDOME (Over Barrel)


Also See Thunderdome (Muzzle Mounted)


Only Available to Purchase through a Gun Shop or RFD

Silencers and Sound Moderators are classed as a firearm and cannot be supplied mail order. Contact your local dealer for UK ordering. We cannot ship any Schultz & Larsen Sound Moderators outside of the UK. (Please contact Schultz & Larsen directly for ordering outside of the UK)
Call Us on 01978 66 00 01 for ordering details.


The Thunderdome is the moderator for those wanting maximum noise reduction and recoil reduction. This big moderator has the capacity to handle the most powerful loads and is especially recommended for taming the big magnums.

Over Barrel
Length: 225mm
Adds to barrel length: 120mm
Diameter: 54mm
Weight: 523 g

Available in:
6mm (.236" max).
7mm (.275" max).
8mm (.315mm max)
9.5mm (.338mm max)
Maximum barrel diameter: 22mm at 100mm from the muzzle

Thread sizes:
Metric: M14x1 / M15x1 / M17x1 / M18x1
Imperial: 1/2" x 20 UNF / 1/2" x 28 UNEF / 5/8" x 24

An additional baffle module is available as an add on to further increase the noise reduction. The module adds 54mm to the length and around 150g to the weight. If you wish to add or remove modules you will need the pair of C-spanners made by Schultz & Larsen for this purpose. Unusually, for a rifle maker at least, Schultz & Larsen have chosen to design and manufacture their own moderators. In doing so they have set the same standards for performance demanded of their rifles.

Each moderator is made of the highest quality materials and designed to withstand repeated firing with heavy calibres. Every baffle has a stainless steel cone in the centre to ensure longevity hence the designation for this model range "Schultz & Larsen Hardcore".

The rear section of the over-barrel models is machined from solid bar and that alone is an impressive piece of engineering.

Maintenance
The moderators require minimal cleaning to prevent rusting. The recommended cleaning method is to run a cleaning rod through the moderator periodically. In theory the carbon left behind from usage actually reduces the noise as it slows the gases flowing through the moderator.

Full Range of Schultz & Larsen Sound Moderators:
- TMD 35 (Muzzle Mounted)
- Ultradome (Over Barrel)
- Superdome (Over Barrel)
- Superdome (Muzzle Mounted)
- Thunderdome (Over Barrel)
- Thunderdome (Muzzle Mounted)
- Ultra Venom (Over Barrel)
- Venom (Over Barrel)
- Venom (Muzzle Mounted)

1 x Krieghoff "K" Denim Cap - Grey1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)4 x Krieghoff Spares Kit2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)4 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Anschütz Biathlon Harness2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Schultz & Larsen Take Down Rifle Case2 x Krieghoff Brass Mid Sight Bead1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)2 x Krieghoff Stock Removal Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff "K" Collectors Badge1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail4 x K-80 Stock Weight for Balance System2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Krieghoff Safety Catch Locking Screw Wrench1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff 12b Choke Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Factory Hanger Pin1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x K-80 Standard Trigger - Gold Titanium2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Krieghoff Front Sight Bead (Standard)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings3 x Krieghoff Extended Pillars for Adjustable Comb1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Custom Rifles of Great Britain by Bruce Potts1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Bauer Outdoor 8x21 Binoculars1 x Ebony & Brass 20 Bore Snap Caps2 x Jones Thru-the-Pad Adjuster2 x K-80 Barrel Weight Balance System1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Krieghoff Front Sight Bead (Small)2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x K-80 Forward Position Trigger - Titanium1 x AimZonic Plus Camo Sound Moderator1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Starkie Blue (A.K.A Smurf Poo)1 x Jones Original Pad Adjuster1 x Walkstool Steady1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Comb Wrench (T-Handle)1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]2 x Krieghoff Woven Fabric Patch1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Black Barrel Case (83cm Internal)1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff 28b Choke Wrench1 x K-80 Forward Position Trigger - Gold Plated1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]2 x Jones Gun Nut Kit1 x Recknagel SOB3D Silencer (Standard Thread)2 x K-80 Forward Position Trigger - Gold Titanium1 x Krieghoff Choke Multi Wrench1 x K-80 Standard Trigger - Titanium1 x Krieghoff Sight Bead Blanking Screw1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Shell Bag1 x Krieghoff Navy Gun Slip1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff "K" Mesh Cap - Black1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Ex-Display Gerber GDC Zip Hex1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Winchester 3" Folding Knife1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Krieghoff C-Clips (E-Clips)
Manufacturers
Useful Information