K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Anschütz Biathlon Harness2 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Trigger Screw3 x Krieghoff Spares Kit1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Navy Gun Slip2 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm3 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Black Barrel Case (83cm Internal)2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff 28b Choke Wrench1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Comb Wrench (T-Handle)1 x WalkStool Set of Spare Red Spring1 x Briley 20b Speed Wrench - For Krieghoff2 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x K-80 Standard Trigger - Gold Titanium2 x Krieghoff Stock Removal Wrench1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Krieghoff Front Sight Bead (Standard)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x AimZonic Compact Camo Sound Moderator2 x K-80 Stock Weight for Balance System1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Ejector Ball and Spring1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x K-80 Forward Position Trigger - Black Titanium1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Sight Bead Blanking Screw1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Black Titanium1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Jones Thru-the-Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Bauer Outdoor 10x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff "K" Logo Cap Black & White1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff "K" Collectors Badge1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff .410g Choke Wrench1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Bear Grylls Scout Essentials Kit1 x Ex-Display Gerber GDC Zip Hex1 x Recknagel SOB3D Silencer (ERA LOC)1 x Silva Map Measurer (Mechanical)1 x Gerber GDC Zip Blade1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Gerber Myth Series Fixed Saw
Manufacturers
Useful Information