K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x EX Demo - Gerber Metolius Pocket Folder1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Krieghoff Navy Gun Slip1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Woven Fabric Patch1 x Winchester 3" Folding Knife1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Bauer HD Series 8x25 Binoculars1 x WalkStool Set of Spare Red Spring1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Sight Bead Blanking Screw1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Schmierfix Grease by Liqui Moly1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Teague Precision Choke Key1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x AA x 4 Camelion Plus Alkaline Batteries1 x Badge - Cob Bronze1 x AimZonic Compact Camo Sound Moderator1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Bauer ED 8x50 Binoculars1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]
Manufacturers
Useful Information