Krieghoff Black Titanium Hanger, Choke Tube Barrels

£230.00
20% VAT incl.

Available Options

  • Model:BTH


The Black Titanium Hanger

Please Note: The Black Titanium Hanger is available to purchase with an estimated 7-10 day delivery time

Black Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the Black Titanium Choke Tubes the difference in handling is noticeable.

Available in sizes #1, #2, #3, #4, #5 #6 and #7 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm
#2 = 1,0 mm
#3 = 1,5 mm
#4 = 2,0 mm
#5 = 2,5 mm
#6 = 3,0 mm
#7 = 3,5 mm
#8 = 4,0 mm



We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
Pin Punches (1.4mm/0.9mm)
Pin Punches (1.4mm/0.9mm)
£15.00
20% VAT incl.
1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff HIVIZ Pro Sights2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Safety Catch Locking Screw Wrench1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff 28b Choke Wrench1 x AimZonic Compact Camo Sound Moderator1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)
Manufacturers
Useful Information