Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)3 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x ERATAC ACI Bubble Level [T0940-0000]2 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Anschütz Biathlon Harness1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff Navy Gun Slip2 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Jones Thru-the-Pad Adjuster1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Recknagel Safety for Mauser K98 [30100-5000]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x Bear Grylls Scout Essentials Kit1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Gerber Dime Multi-Tool (Lime)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Bear Grylls Compact Multi-Tool by Gerber1 x Recknagel QD Sling Swivel Socket - Screw-on [23225-0000]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Black Barrel Case (83cm Internal)1 x Jones Original Pad Adjuster1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Gerber GDC Zip Blade
Manufacturers
Useful Information