Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Pro Choke Box2 x Krieghoff Spares Kit1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Trigger Screw3 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Anschütz Biathlon Harness1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Schultz & Larsen Take Down Rifle Case1 x K-80 Stock Weight for Balance System1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Starkie Blue (A.K.A Smurf Poo)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Black Barrel Case (83cm Internal)1 x Schmierfix Grease by Liqui Moly1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel SOB3D Silencer (Standard Thread)1 x Custom Rifles of Great Britain by Bruce Potts1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ebony & Brass 20 Bore Snap Caps1 x Black Leather Shell/Cartridge Pouch1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Trigger & Selector Locking Wrench1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff Choke Multi Wrench1 x Teague Precision Choke Key1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Ex-Display Gerber GDC Zip Hex1 x Gerber Bullrush Tactical Multi-Tool1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Krieghoff "K" Mesh Cap - Black1 x Gerber Dime Multi-Tool (Lime)1 x Silva ex10 Distance Pedometer - White1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)2 x Gerber Basic Fixed Blade Serrated1 x Ex-Demo K-80 Steel 12b Hanger #51 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Gerber Powerframe Knife1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Gerber Descent - Folding Knife1 x Silva Dine Duo Kit - Purple/White1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Silva Commute Bike Light - Pink1 x LED Lenser Intelligent Filter Set with Holster1 x Gerber Gator Combo Replacement Saw1 x Gerber GDC Zip Blade
Manufacturers
Useful Information