Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Briley 20b Speed Wrench - For Krieghoff1 x Jones Thru-the-Pad Adjuster1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Gerber Metolius Pocket Folder1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Gerber Basic Fixed Blade Serrated1 x Ex-Display Gerber GDC Zip Hex1 x Recknagel SOB3D Silencer (ERA LOC)2 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Gerber GDC Zip Blade1 x Parker Hale Thread to 8-32 Thread Converter1 x Gerber Paraframe II Fine Edge Knife1 x Schultz & Larsen Professional Bipod by Spartan2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Schmierfix Grease by Liqui Moly2 x VFG Adaptor for VFG Rods Brass1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel 36mm Ring Components - 5mm BH1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Sling Swivel Loop - 20mm, M4 Screw [21215-1016]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Sling Swivel Loop, Wood Screw [21410-9020]
Manufacturers
Useful Information