Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm (0.51") Thick / Weight: 91 g
301-6 - 18mm (0.71") Thick / Weight: 125 g
301-8 - 23mm (0.91") Thick / Weight: 172 g
301-10 - 28mm (1.02") Thick / Weight: 216 g

(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

2 x Recknagel Barrel Banded Front Ramp [12530-....]2 x Recknagel Super Express 2 Leaf Sight [15400-3036]2 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel Steel Stock Trap Door1 x Ex-Demo K-80 Steel 12b Hanger #82 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x EX Demo - Gerber Metolius Pocket Folder1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Krieghoff Comb Wrench (T-Handle)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x K-80 Forward Position Trigger - Steel1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x K-80 Forward Position Trigger - Black Titanium1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x K-80 Forward Position Trigger - Gold Plated1 x Jones Gun Nut Kit1 x Recknagel SOB02 Silencer (Standard Thread)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Krieghoff "K" Denim Cap - Navy1 x Ex-Display Bear Grylls Ultimate Pack with Multi-Tool1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)4 x Krieghoff Pro Choke Box1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x K-80 Standard Trigger - Black Titanium1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Mesh Cap - Black3 x Krieghoff "K" Denim Cap - Grey1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Contessa Picatinny Rail - Sako 75/85 X-Short (20 MOA)1 x WalkStool Set of Spare Red Spring1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Bear Grylls Compact Multi-Tool by Gerber1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Chamber Brush 20b1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff 2015 Badge (Collectors Badge)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Black Leather Shell/Cartridge Pouch1 x WalkStool Spare Leg Joints1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Custom Rifles of Great Britain by Bruce Potts1 x K-80 Forward Position Trigger - Titanium1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Chapman Precision Screwdriver Set 8900, 28 Piece (SAE)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff 2013 Badge (Collectors Badge)1 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]1 x Anschütz Biathlon Harness1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud2 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x K-80 Barrel Weight Balance System1 x Krieghoff C-Clips (E-Clips)1 x Recknagel SOB3D Silencer (Standard Thread)2 x Krieghoff Brass Mid Sight Bead1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)2 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Trigger Screw1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Gerber Dime Multi-Tool (Lime)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Gerber GDC Zip Blade1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Gerber Paraframe II Fine Edge Knife1 x Gerber Powerframe Knife1 x Clearance Americase Cordura Case Cover (32x11x3")
Manufacturers
Useful Information