Kick-Eez Trap (401)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ401
This pad has a concave face and was designed especially for "Fixed Position" trapshooting.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black
Measurements (All 401 Series Pad):
Width - 52mm / 2.04"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad:
401-6 - 19mm (0.75") Thick / Weight: 158 g
401-8 - 23mm (0.94") Thick / Weight: 197 g
401-10 - 29.5mm (1.16") Thick / Weight: 235 g
(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 301 - All Purpose
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: A. Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

2 x Krieghoff Navy Canvas Gun Slip3 x AG3 / 392A Alkaline Batteries (10 Pack)2 x Custom Rifles of Great Britain by Bruce Potts1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)2 x Contessa Picatinny Rail - Sauer 90 (0 MOA)4 x Krieghoff Spares Kit2 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC M-Lok Adaptor for Harris Bipod [T5390-0005]2 x Bauer HD 8.5x50 Binoculars2 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)5 x AimZonic Plus Camo Sound Moderator3 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)2 x Bauer HD 8x42 Binoculars3 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)4 x Bauer Outdoor 8x21 Binoculars3 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)3 x Schultz & Larsen Take Down Rifle Case4 x AimZonic Compact Camo Sound Moderator3 x Badge - Cob Bronze3 x Bauer Outdoor 10x25 Binoculars3 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Bauer ED 8x32 Binoculars1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Clearance Americase Cordura Case Cover (32x11x3")1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Spare Plastic Feet1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Bauer ED 8x50 Binoculars2 x Chamber Brush 20b1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Bauer ED 8x42 Binoculars2 x Krieghoff Trigger Screw1 x Bauer HD 8x56 Binoculars1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x WalkStool Spare Leg Joints1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x AA x 4 Camelion Plus Alkaline Batteries1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Black Barrel Case (83cm Internal)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)2 x Krieghoff Achievement Badge 100/3001 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Achievement Badge 200 Straight (Blue)2 x Krieghoff Achievement Badge 25 Straight1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Krieghoff Factory Hanger Pin1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Krieghoff 2015 Badge (Collectors Badge)2 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Bear Grylls Scout Essentials Kit1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)3 x Hi Viz - How to Become a Better Shooter1 x WalkStool Set of Spare Red Spring2 x Bauer HD Series 8x25 Binoculars1 x Recknagel Screw M3.5 x 3.8 x 5 [..0380]3 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff 2013 Badge (Collectors Badge)2 x CR2032 Camelion Lithium Battery1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Krieghoff C-Clips (E-Clips)2 x AAA x 4 Camelion Plus Alkaline Batteries1 x Krieghoff Shooter's Towel - Green2 x Anschütz Biathlon Harness1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Bear Grylls Basic Survival Kit by Gerber1 x Krieghoff Shooter's Towel - Black1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Ebony & Brass Cleaning Rod1 x Krieghoff 2012 Badge (Collector's Badge)1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Leather Shell/Cartridge Pouch1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Krieghoff 2011 Badge (Collectors Badge)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)
Manufacturers
Useful Information