K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff Shell Bag1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Spare Leg Joints1 x Walkstool Steady1 x WalkStool Set of Spare Red Spring1 x Krieghoff Spares Kit1 x Krieghoff Navy Canvas Gun Slip1 x Black Barrel Case (83cm Internal)2 x K-80 Stock Weight for Balance System1 x Krieghoff Comb Wrench (T-Handle)1 x Jones Original Pad Adjuster1 x Jones Gun Nut Kit1 x Krieghoff Stock Removal Wrench1 x Jones Thru-the-Pad Adjuster2 x Teague Precision Choke Key1 x Krieghoff Extended Pillars for Adjustable Comb2 x K-80 Barrel Weight Balance System1 x Bauer Outdoor 10x25 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x K-80 Forward Position Trigger - Gold Titanium2 x K-80 Standard Trigger - Titanium2 x K-80 Standard Trigger - Gold Titanium2 x K-80 Forward Position Trigger - Titanium2 x K-80 Forward Position Trigger - Black Titanium2 x K-80 Standard Trigger - Black Titanium1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Recknagel Picatinny Rail Savage Long 20 MOA, Alu [..2193]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff 28b Choke Wrench1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff 12b Choke Wrench1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Trigger & Selector Locking Wrench1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Choke Multi Wrench1 x Krieghoff .410g Choke Wrench1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x AimZonic Plus Camo Sound Moderator1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff Factory Hanger Pin1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Krieghoff "K" Denim Cap - Grey1 x K-80 Standard Trigger - Steel1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Brass Front Sight Bead1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff HIVIZ Pro Sights1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Gold Plated1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Standard Trigger - Gold Plated1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Schmierfix Grease by Liqui Moly
Manufacturers
Useful Information