K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

3 x Krieghoff Navy Gun Slip1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Brass Front Sight Bead1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Trigger Screw1 x WalkStool Spare Leg Joints3 x K-80 Forward Position Trigger - Titanium1 x ERATAC Bubble Level [T0940-0002]2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Pro Choke Box1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Factory Hanger Pin1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]2 x Krieghoff Choke Multi Wrench1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Teague Precision Choke Key1 x Krieghoff Woven Fabric Patch1 x Jones Gun Nut Kit1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Jones Original Pad Adjuster2 x Krieghoff Stock Removal Wrench1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff "K" Mesh Cap - Black1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Brass Mid Sight Bead1 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff C-Clips (E-Clips)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff Sight Bead Blanking Screw1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff 12b Choke Wrench1 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Standard Trigger - Gold Plated1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Front Sight Bead (Small)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x K-80 Standard Trigger - Titanium1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x K-80 Standard Trigger - Steel1 x Krieghoff Spares Kit1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)
Manufacturers
Useful Information