K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Schmierfix Grease by Liqui Moly1 x Krieghoff Woven Fabric Patch1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff "K" Denim Cap - Grey1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff Brass Mid Sight Bead1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Anschütz Biathlon Harness1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Pro Choke Box2 x Krieghoff Trigger Screw1 x Krieghoff Spares Kit2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm3 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)3 x Krieghoff Brass Front Sight Bead1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor3 x K-80 Stock Weight for Balance System1 x WalkStool Spare Leg Joints1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Starkie Blue (A.K.A Smurf Poo)1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x Black Barrel Case (83cm Internal)1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Krieghoff Shell Bag1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Recknagel Steel Stock Trap Door1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Picatinny Rail 200mm Blank No Slots, Steel [..0000]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Recknagel Picatinny Rail Browning BAR, Steel [..0003]1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel 36mm Ring Components - 5mm BH1 x Krieghoff Extended Pillars for Adjustable Comb2 x Krieghoff Comb Wrench (T-Handle)1 x Jones Gun Nut Kit1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff Front Sight Bead (Small)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff .410g Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Front Ramp Hood ATV [13093-1810]1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Krieghoff Stock Removal Wrench1 x Recknagel Masterpiece Banded Front Ramp [12520-0180]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Krieghoff Safety Catch Locking Screw Wrench1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Recknagel Picatinny Rail Benelli ARGO, Alu [..0076]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Krieghoff C-Clips (E-Clips)1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Picatinny Rail Browning A Bolt 3 Short, Alu [..002T]1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Grip Cap Flat with Small Edge [24020-0400]1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff 12b Choke Wrench1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Picatinny Rail Browning Maral, Alu [..002J]1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]
Manufacturers
Useful Information