Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

4 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Anschütz Biathlon Harness2 x Jones Original Pad Adjuster3 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)3 x Krieghoff Trigger Screw1 x Krieghoff Navy Gun Slip1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Recknagel Weaver Bases - Schultz & Larsen [57080-3093]1 x Schultz & Larsen Picatinny Rail for Ambassador (0 MOA)1 x Schultz & Larsen Weaver Rings 30mm, 7mm BH, Steel1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Schultz & Larsen Picatinny Rail for Ambassador (20 MOA)1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Browning X-Bolt Long (0 MOA)1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)1 x Schultz & Larsen Weaver Rings 30mm, 4mm BH, Steel1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff Brass Front Sight Bead2 x Krieghoff HIVIZ Pro Sights1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Teague Precision Choke Key1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud2 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x AimZonic Plus Camo Sound Moderator1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff Pro Choke Box1 x Custom Rifles of Great Britain by Bruce Potts1 x Krieghoff Spares Kit1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ebony & Brass 20 Bore Snap Caps2 x Black Barrel Case (83cm Internal)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel SOB3D Silencer (Standard Thread)1 x WalkStool Set of Spare Red Spring1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x WalkStool Spare Leg Joints1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Walkstool Steady1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Bauer HD Series 8x25 Binoculars1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x WalkStool Comfort 65 (65cm/26in)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen Torx Key for Scope Mounts1 x Bauer Outdoor 10x25 Binoculars1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Krieghoff Woven Fabric Patch1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x MSA Sordin - Hygiene Kit - Foam Seals1 x Bear Grylls Basic Survival Kit by Gerber1 x Bauer HD 8x42 Binoculars1 x Gerber GDC Zip Blade1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Hi Viz - How to Become a Better Shooter1 x Krieghoff "K" Denim Cap - Grey1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff "K" Mesh Cap - Black
Manufacturers
Useful Information