Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Krieghoff Navy Gun Slip3 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff "K" Denim Cap - Grey1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights2 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - CZ 527 (0 MOA)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Spares Kit2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x WalkStool Set of Spare Red Spring1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Custom Rifles of Great Britain by Bruce Potts1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x K-80 Standard Trigger - Gold Titanium1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff Comb Wrench (T-Handle)2 x Schmierfix Grease by Liqui Moly1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Jones Gun Nut Kit1 x Krieghoff Stock Removal Wrench1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x AimZonic Compact Camo Sound Moderator1 x K-80 Forward Position Trigger - Steel1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ebony & Brass 20 Bore Snap Caps1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x K-80 Standard Trigger - Steel1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Bauer HD Series 8x25 Binoculars1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x Briley 20b Speed Wrench - For Krieghoff1 x Black Barrel Case (83cm Internal)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Extended Pillars for Adjustable Comb2 x Krieghoff Ejector Ball and Spring2 x K-80 Stock Weight for Balance System1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Krieghoff Front Sight Bead (Small)2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Teague Precision Choke Key1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Silva Dine Duo Kit - Purple/White2 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)2 x AA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Picatinny Rail Browning X Bolt Long, Alu [..011P]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23115-5010]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Picatinny Rail Benelli ARGO, Alu [..0076]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Silva Pavé Sport Bike Light White/Black1 x LED Lenser Car Charger1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Recknagel 30mm Ring Components - 5mm BH1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Recknagel QD Sling Swivel Socket - Screw-on [23225-0000]2 x Recknagel SOB01 Silencer (Standard Thread)2 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Bauer Outdoor 10x25 Binoculars1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]2 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]2 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Picatinny Rail 204mm Blank, Alu [..0120]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]2 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x LED Lenser Intelligent Filter Set with Holster1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Silva Commute Bike Light - Pink1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Krieghoff Front Sight Bead (Standard)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Spare Ring-to-Base Screws1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x K-80 Forward Position Trigger - Titanium1 x Bauer ED 8x32 Binoculars1 x Bauer ED 10x42 Binoculars1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Bauer ED 8x50 Binoculars1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x K-80 Barrel Weight Balance System1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Jones Original Pad Adjuster1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x ERATAC M-Lok Picatinny Rail, 3 Slots [T5903-0008]1 x K-80 Standard Trigger - Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)
Manufacturers
Useful Information