K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

4 x Schmierfix Grease by Liqui Moly4 x K-80 Barrel Weight Balance System2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master3 x Krieghoff Brass Front Sight Bead1 x Parker Hale Thread to 8-32 Thread Converter2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)4 x K-80 Stock Weight for Balance System1 x ERATAC Bubble Level [T0940-0002]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Teague Precision Choke Key1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x AG3 / 392A Alkaline Batteries (10 Pack)3 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Bauer Outdoor 8x21 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Bauer Outdoor 10x25 Binoculars2 x K-80 Standard Trigger - Steel1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff "K" Logo Cap Navy & White2 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff "K" Denim Cap - Grey1 x K-80 Forward Position Trigger - Steel2 x K-80 Standard Trigger - Gold Titanium2 x Krieghoff Navy Canvas Gun Slip2 x K-80 Forward Position Trigger - Titanium1 x K-80 Standard Trigger - Titanium2 x K-80 Forward Position Trigger - Gold Titanium2 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Trigger Screw2 x Krieghoff C-Clips (E-Clips)2 x Jones Thru-the-Pad Adjuster3 x Krieghoff Factory Hanger Pin1 x Krieghoff Ejector Ball and Spring2 x Jones Gun Nut Kit1 x Krieghoff Front Sight Bead (Small)2 x Jones Original Pad Adjuster2 x Krieghoff Spares Kit1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Brass Mid Sight Bead1 x Black Leather Shell/Cartridge Pouch1 x Custom Rifles of Great Britain by Bruce Potts1 x Krieghoff .410g Choke Wrench1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff 12b Choke Wrench1 x WalkStool Spare Leg Joints1 x Krieghoff Stock Removal Wrench1 x Starkie Blue (A.K.A Smurf Poo)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Pro Choke Box1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Set of Spare Red Spring1 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Black Barrel Case (83cm Internal)1 x Krieghoff Front Sight Bead (Standard)2 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff Trigger & Selector Locking Wrench1 x Walkstool Steady1 x Krieghoff 28b Choke Wrench1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff Shell Bag1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)
Manufacturers
Useful Information