K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Krieghoff 2012 Badge (Collector's Badge)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Krieghoff "K" Mesh Cap - Black2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Krieghoff Woven Fabric Patch1 x Bauer Outdoor 8x21 Binoculars1 x Krieghoff K-80 Sport Logo Cap Navy & Red3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Krieghoff Trigger Screw2 x Krieghoff "K" Denim Cap - Grey1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff Spares Kit1 x K-80 Forward Position Trigger - Titanium1 x VFG Adaptor for VFG Rods (Spare)1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Picatinny Rail - Tikka T1 / T1X (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Silva Map Measurer (Mechanical)1 x Gerber GDC Zip Blade1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x AAA x 4 Camelion Plus Alkaline Batteries1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights1 x AA x 4 Camelion Plus Alkaline Batteries1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff Navy Canvas Gun Slip2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Brass Front Sight Bead1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Achievement Badge 200 Straight (Black)1 x ERATAC Bubble Level [T0940-0002]1 x K-80 Stock Weight for Balance System
Manufacturers
Useful Information