K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Parker Hale Thread to 8-32 Thread Converter1 x Jones Thru-the-Pad Adjuster2 x Krieghoff Brass Front Sight Bead1 x Anschütz Biathlon Harness2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Krieghoff "K" Denim Cap - Grey2 x Jones Original Pad Adjuster1 x Schultz & Larsen Professional Bipod by Spartan2 x Jones Gun Nut Kit1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff HIVIZ Pro Sights1 x Teague Precision Choke Key1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Bauer Outdoor 10x25 Binoculars1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes3 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Schultz & Larsen Take Down Rifle Case2 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Forward Position Trigger - Gold Titanium1 x AimZonic Compact Camo Sound Moderator1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Black Titanium1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x AimZonic Plus Camo Sound Moderator1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Standard Trigger - Steel1 x K-80 Standard Trigger - Gold Plated1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x K-80 Standard Trigger - Titanium1 x Krieghoff Woven Fabric Patch1 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff Stock Removal Wrench1 x Black Barrel Case (83cm Internal)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Trigger & Selector Locking Wrench1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff Safety Catch Locking Screw Wrench2 x K-80 Stock Weight for Balance System1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Shell Bag1 x Krieghoff Factory Hanger Pin1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff .410g Choke Wrench1 x Krieghoff 12b Choke Wrench1 x Custom Rifles of Great Britain by Bruce Potts1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff 28b Choke Wrench2 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff "K" Logo Cap Navy & White1 x K-80 Barrel Weight Balance System1 x Krieghoff K-Diamond Beanie - Burgundy1 x Krieghoff K-Diamond Beanie - Heather Grey1 x Krieghoff K-Diamond Beanie - Grey1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Krieghoff K-Diamond Beanie - Navy1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)
Manufacturers
Useful Information