K-80 Standard Trigger - Titanium

£265.00
20% VAT incl.


  • Model:TTST
The K-80/K-20 TT-Blade. This new style titanium trigger blade from Krieghoff provides a more secure location for your finger in all weather conditions. The vented surface allows water to drain away on the wettest day and your finger locks into the slots. It looks great with the Titanium Hangers and Titanium Choke Tubes! The Titanium Trigger fits all new model K-80 guns that have the trigger blade attached on a T-slot rail. Earlier guns had a dovetail. If you wish to fit a TT trigger on an earlier gun then you will also need a trigger upgrade. This can be done in our Krieghoff Service facility. Normally we recommend that you send the receiver of your gun to have the trigger fitted. It is possible to fit the blade yourself but please note the instructions you can read by reading the installation Procedure.

Fitting:

The K80 trigger blade is adjustable for position along a slide. There are two set screws on the underside of the trigger blade. The screw socket takes a 1.27mm wrench, 0.050″ or 1/20th inch imperial. Use a Krieghoff Trigger/Selector Wrench. The rearmost screw locks the blade onto the slide whilst the front screw locks the barrel selector positioned immediately in front of the trigger blade. There are two trigger blade types, standard position and forward position. The standard blade has both screws in front of the curved blade whilst the forward position trigger has one screw in front and one directly behind the blade. Function of the two screws is the same.

To move the trigger blade, slacken the rear screw but note that the front screw, if locked, will also lock the trigger blade. The front screw has to be far enough out to allow the blade to slide so if it will not move try backing that screw out some more. Occasionally, the blade will be stuck on the slide but is easily freed with a nylon drift. Make sure both screws are free before tapping the blade with anything. Once in position, tighten the rearmost screw to lock the blade on the slide.

To lock the selector, tighten the front screw until the selector cannot be switched left to right. To release the selector, simply slacken that screw off again.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.


Watch the Trigger Replacement Instructional Video here:



You might also like...

Krieghoff Shooting Vest
Krieghoff Shooting Vest
£160.00
20% VAT incl.
Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
Pin Punches (1.4mm/0.9mm)
Pin Punches (1.4mm/0.9mm)
£15.00
20% VAT incl.
2 x Schultz & Larsen Professional Bipod by Spartan4 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff "K" Beanie - Plum1 x Krieghoff Shell Bag1 x Krieghoff Shooter's Towel - Black2 x Krieghoff Spares Kit1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Mount for Burris/Nikon1 x Krieghoff Comb Wrench (T-Handle)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x K-80 Barrel Weight Balance System1 x Silva Pavé Sport Bike Light White/Black1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Bauer Power LED L-XL1 Torch2 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Gerber Metolius Pocket Folder2 x Krieghoff Trigger Screw1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Bear Grylls Compact Multi-Tool by Gerber1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x K-80 Stock Weight for Balance System1 x Krieghoff 2009 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Krieghoff 12b Choke Wrench1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff K-Diamond Beanie - Heather Navy2 x Jones Thru-the-Pad Adjuster2 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Walkstool Steady1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Contessa Picatinny Rail - Browning A Bolt 3 Long (0 MOA) Extended1 x Contessa Browning European Euro Rail for Quick Release Mount1 x K-80 Standard Trigger - Gold Plated2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (0 MOA)1 x K-80 Standard Trigger - Titanium1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)
Manufacturers
Useful Information