Starkie Blue (A.K.A Smurf Poo)

£4.99
20% VAT incl.


  • Model:STARKIE-B
Starkie Blue Metal Polishing Compound.

Used in conjunction with a leather strop to achieve that razor edge on your knife. Any suitable piece of leather can be used as a strop. The paste should be put on the rough side of the leather rather than on the smooth face.

How it Works:
1. Vigrously rub this polishing compound stick onto your leather until you have an even, but thin, layer on the leather. In cold weather the paste will be hard but vigorous rubbing on the leather will still deposit a thin grey layer. Storing the paste in a warm environment makes it a little easier to rub onto the leather.

2. Once you begin stropping you will see the blue surface slowly turning black as it removes a microscopically thin layer of metal leaving you with a razor sharp edge.

Leather is mildly abrasive in itself, this compound speeds up the process of stropping considerably.

For those who do not know, stropping is the reverse of sharpening. You draw the blade across the leather in the opposite direction to sharpening. Keep the blade angle the same as when sharpening but draw the blade across the leather backwards. When sharpening you draw the knife across the sharpener as if trying to take a thin slice off the top of the stone, but when stropping you draw the blade backwards at the same angle. Do this on alternative sides, always keeping the same angle, and you will develop a razor edge surprisingly quickly.

Weight: 65 g (Approx.)
Size: 95 x 30 x 20 mm
2 x Schmierfix Grease by Liqui Moly1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Parker Hale Thread to 8-32 Thread Converter1 x Anschütz Biathlon Harness1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Browning A Bolt 3 Short (0 MOA)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Spare Ring-to-Base Screws1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Winchester 70 S Euro Rail Base for QR Mounts1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Black Barrel Case (83cm Internal)1 x Black Leather Shell/Cartridge Pouch1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)
Manufacturers
Useful Information