Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x Schmierfix Grease by Liqui Moly2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Navy Gun Slip1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Pro Choke Box1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Spares Kit1 x Winchester 3" Folding Knife2 x Krieghoff Trigger Screw1 x Anschütz Biathlon Harness3 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Krieghoff Woven Fabric Patch2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)2 x AimZonic Plus Camo Sound Moderator1 x Schultz & Larsen Ultradome Moderator (Over Barrel)2 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x AimZonic Compact Camo Sound Moderator1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Recknagel SOB02 Silencer (Standard Thread)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)3 x Recknagel SOB3D Silencer (ERA LOC)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x Jones Gun Nut Kit1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]2 x Krieghoff Comb Wrench (T-Handle)2 x Jones Thru-the-Pad Adjuster1 x K-80 Standard Trigger - Steel1 x Black Leather Shell/Cartridge Pouch1 x Recknagel Front Ramp [12000-0000]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Custom Rifles of Great Britain by Bruce Potts1 x Jones Original Pad Adjuster1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Starkie Blue (A.K.A Smurf Poo)1 x Recknagel Steel Stock Trap Door1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Front Sight Bead (Small)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]2 x Krieghoff Sight Bead Blanking Screw1 x Schultz & Larsen Take Down Rifle Case1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x K-80 Forward Position Trigger - Black Titanium1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x K-80 Barrel Weight Balance System1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Grip Cap Compartment1 x Recknagel Front Sight Bead White [11442-0300]2 x Krieghoff Extended Pillars for Adjustable Comb1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Recknagel Front Sight Bead Red [11444-0300]1 x Black Barrel Case (83cm Internal)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Brass Mid Sight Bead2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Krieghoff 12b Choke Wrench1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x WalkStool Spare Leg Joints1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Forward Position Trigger - Steel1 x K-80 Standard Trigger - Black Titanium1 x Walkstool Steady1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff HIVIZ Pro Sights1 x K-80 Standard Trigger - Titanium1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Standard Trigger - Gold Plated1 x Recknagel SOB3D Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Trigger & Selector Locking Wrench1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Factory Hanger Pin1 x Silva Pavé Sport Bike Light White/Black1 x Silva Commute Bike Light - Green1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Bauer HD 8.5x50 Binoculars1 x Krieghoff 2013 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]
Manufacturers
Useful Information