Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Complete Set for .1772 x VFG Barrel Cleaning Felts for 9mm (Box of 40)4 x VFG Pull Through Pocket Set for .22 Upwards3 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen Take Down Rifle Case2 x Ziegler Quick Release Mount for Blaser - Zeiss Rail2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Magnetic Felt Clamps for Vices - 125mm2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Jones Original Pad Adjuster1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Jones Gun Nut Kit1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Badge - Cob Bronze2 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x Contessa Picatinny Rail - Sako A7 Short (0 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Spare Screw for Sako 75/85 Rails2 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)2 x Recknagel Picatinny Rail Sako Long, Alu [..0114]2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Recknagel Replacement Polyform Lever [00088-5700]2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Sako 75/85 X-Short (10 MOA)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)2 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Gerber GDC Zip Blade1 x Gerber Metolius Pocket Folder1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Spare Ring-to-Base Screws1 x Contessa Quick Release Picatinny Rail1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Gerber Balance Multi-Tool Black1 x Gerber Basic Fixed Blade Serrated2 x Starkie Blue (A.K.A Smurf Poo)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x Bear Grylls Compact Multi-Tool by Gerber1 x Gerber Myth Series Fixed Saw1 x Ex-Display Gerber GDC Zip Hex1 x DMT Non-Skid Mat (10"x4")1 x Gerber Octane Multi-Tool Red1 x DMT Diafold Magna-Guide Kit1 x Gerber Dime Multi-Tool (Lime)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)
Manufacturers
Useful Information