VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x K-80 Standard Trigger - Black Titanium1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x WalkStool Spare Leg Joints1 x VFG Barrel Cleaning Felts for .45 (Box of 30)2 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo K-80 Steel 12b Hanger #61 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Bauer - One Piece Railmount 25.4mm (11mm High)
Manufacturers
Useful Information