Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)

£148.61
20% VAT incl.


  • Model:PH31/C/10
Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)
Contessa Satin Chromed Picatinny Rail for Sako 85 X-Short
With 10 MOA
Fits Sako Models: 75* / 85 XS

Rail Length: - 116mm
Height (BH) - 12.5mm Approx.
Weight: - 140g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 56mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Anschütz Biathlon Harness3 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .375 (Box of 500)4 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)3 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)4 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Spares Kit2 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x EX Demo - Gerber Metolius Pocket Folder1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Adaptor for VFG Rods (Spare)1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Silva Commute Bike Light - Green2 x Ex-Display Gerber GDC Zip Hex1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff Stock Removal Wrench1 x Bauer HD Series 8x25 Binoculars1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Black Barrel Case (83cm Internal)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Krieghoff K-Diamond Beanie - Navy1 x Bear Grylls Pocket Tool1 x Bear Grylls Scout Essentials Kit1 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Bear Grylls Ultra Compact Knife1 x VFG Quick Clean Felts for .22 (Box of 80)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)2 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Complete Set for .1771 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Jones Original Pad Adjuster1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Bauer Outdoor 10x25 Binoculars1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Krieghoff Woven Fabric Patch1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x K-80 Standard Trigger - Titanium1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Briley 20b Speed Wrench - For Krieghoff3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Contessa Quick Release Mount for Zeiss Rail1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Gerber Descent - Folding Knife1 x Winchester 3" Folding Knife1 x Silva Pavé Sport Bike Light White/Black1 x Silva Dine Duo Kit - Turquoise/White1 x Gerber GDC Zip Blade1 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Front Ramp [12000-0000]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)
£12,681.10
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA) Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable